Searching for a way to jazz up your wall artwork? Try out producing your possess Do-it-yourself acrylic frames for personalized 3D artwork. This put up will stroll you by means of precisely how I created these in my household.
If you are searching for a tailor made way to body your images or artwork to make it stand out from the wall, these Do it yourself acrylic frames are the perfect issue.
I landed on these frames mainly because I needed a tiny some thing to add a tiny excess pizzazz to my toilet wall. 
We resolved to incorporate my husband&rsquos enjoy of golf into the blend by printing pictures he took of PGA golf programs he&rsquos played in black and white.
I adore when art is a discussion piece, so this was the fantastic addition to the rest room wall.
To make it truly stand out, I designed these Do-it-yourself acrylic frames for every of the pics.
In this article are the steps I took&hellip 
Desk OF CONTENTS
- one. Gather your resources.
- 2. Tape every aspect of every corner.
- three. Mark the place you want to drill your holes.
- 4. Drill your holes.
- 5. Use your glue dots to protected your images to the body.
- six. Mark the complete on the wall exactly where you plan to hang it.
- 7. Use your punch device to mark the total on the wall.
- eight. Drill your holes in the wall.
- 9. Screw the standoffs into the wall.
- 10. Attach your body to the standoffs.
- 11. Revel in the completed solution!
Disclaimer: This write-up does include things like affiliate back links for your advantage. click now is at NO additional expense to you but earns me a compact commission. To read a lot more, verify out our disclosure plan.
one. Collect YOUR Products.
Initial points very first, assemble all your materials. All resources for everything I utilized are joined under. I also involved a checklist with inbound links of what we utilised to cling the frames, too. 
FOR Creating THE Do-it-yourself ACRYLIC FRAMES:
- Plexiglass/Acrylic Sheets
- Standoffs
- Glue Dots
- Piece of Lined Paper
- Drill 
- Drill Bits (one for the size of the opening of your standoffs and one particular for the screw for the wall)
- Painter&rsquos Tape
- Ruler
- Marking Instrument (I utilized a Sharpie)
FOR HANGING THE Do it yourself ACRYLIC FRAMES:
- Pencil
- Handheld Degree
- Punch
- Screwdriver
two. TAPE Each and every Aspect OF Every CORNER.
Plexiglass/acrylic is incredibly delicate.
Mainly because of this, you have to be extremely cautious when you are drilling the holes.
Placing a piece of painter&rsquos tape on either side exactly where you strategy to drill your gap will assist hold the acrylic sheet from breaking or cracking when you drill.
I also held the protecting include on each aspect of the piece, way too.
three. MARK Where YOU WANT TO DRILL YOUR HOLES.
The moment you have placed the painter&rsquos tape on all 4 sides (or nevertheless several locations you prepare to drill a hole), you can place a mark of exactly where you want to drill your gap.
I drilled my holes one&Key in from every single edge as you can see from the photo higher than.
4. DRILL YOUR HOLES.
Before basically drilling, double and triple test that your marks are degree each horizontally and vertically.
You&rsquoll want to have these amount for when you hold them. 
The drill bit you pick ought to be major enough to allow for the standoff to in good shape inside the hole.
I would do a exam run on a piece of scrap substance to make confident it is major ample. 
After you are certain that the marking are degree and the little bit is huge sufficient, you want to start out drilling.
Here is a great video to comply with if you would like a demonstration on how to drill via acrylic.
You want to use about 50 % ability when you are drilling.
Slow and continuous. If you go to rapidly, the acrylic will crack, so take your time.
As you drill you really should see spirals of the acrylic slowly but surely remaining taken off. 
Repeat the drilling for every gap you have to have.
5. USE YOUR GLUE DOTS TO Safe YOUR Images TO THE Body.
When your holes are produced, you can add your image to the piece of acrylic/frame.
The vital here is to yet again, make certain your picture is amount right before you completely safe it to the body.
The glue dots are incredibly sticky and don&rsquot allow for a large amount of wiggle home, so it might be a good strategy to line up a piece of lined paper at the rear of the body to assistance you line the edges of your photograph.
What ever trick operates for you to make confident the image gets glued to the body stage will do. 
six. MARK THE Full ON THE WALL In which YOU Plan TO Hang IT.
As you start to cling, mark your holes on the wall, but make confident your body is degree.
If you calculated properly in the stage ahead of drilling, the holes on your body really should presently be stage.
If you are hanging additional than one particular frame like I did, make sure just about every body is stage in your grid, way too. 
seven. USE YOUR PUNCH Resource TO MARK THE Entire ON THE WALL.
I love this tool so a great deal due to the fact it will get your gap begun and allows your drill to continue to be in area when you start drilling.
If you don&rsquot have one, I hugely endorse it!
8. DRILL YOUR HOLES IN THE WALL.
Be certain to use a bit that matches the screws that came together with your standoffs.
This will most most likely be a lesser bit than the one particular you applied on the frames.
I also applied a stud finder to see if I essential drywall anchors, but because these frames are not that heavy, you could likely do without the need of them.
9. SCREW THE STANDOFFS INTO THE WALL.
Once you invest in your standoffs, you&rsquoll see how they operate.
In order for the picture to &ldquostand off&rdquo the wall, you have to secure the standoff with the presented screw prior to attaching the image to the standoffs.
As you can see from the photo, producing absolutely sure everything is degree and calculated accurately is super significant. 
ten. Connect YOUR Frame TO THE STANDOFFS.
At the time you&rsquove attached the standoffs, it&rsquos time to attach the pics!
Line up the standoffs with your drilled holes and secure the standoffs.
If all goes properly, almost everything will line up correctly and be ready to go!
If you are like my father and I, you&rsquoll occur throughout at minimum a person that doesn&rsquot line up flawlessly.
For this, we cheated a little little bit and secured the standoff to the frame and used a glue dot to secure it to the wall, so it didn&rsquot shift.
We only had to do this for two corners of two frames, but don&rsquot be concerned if you mess up one&hellip We&rsquove been there! 
eleven. REVEL IN THE Completed Solution!
Now it&rsquos time to love your operate!
We did a grid of 9 whole photos which was a large enterprise with all the measuring, but I&rsquom in adore with how it turned out.
Allow me know in the reviews what you imagine of the finished solution!